PET Chip Pulsed Crystallizing Continuous Dryer
Especially for drying PET chips
It consists of fluidized bed crystallizer, drying tower, air dryer, and electrical control system (PLC or DCS)
Adding agitator and stopper distribution device to the feed zone of the crystallizer can contribute to drying water-soluble chips and low-melting chips that bond easily.
Suitable for drying chip and lump for PET, COPET, PTT, PBT, PPS, PPL, PP and PE.
Application: POY (Filament), FDY, BCF, PSF (Staple fiber), Non-woven fabrics, BOPET, BOPA, BOPP, Engineering plastics, etc.
Capacity: 50kg/h~ 5t/h
Water ratio：According to the technologic requirements, it can reach to15ppm
Dew point of dry air：≤-80℃
Energy consumption per ton for reference: 75KWh/t~95KWh/t
(In accordance with capacity）