Polyamide Chip Continuous Dryer (WSPD)
Especially for drying PA6, PA66 chips
It consists of raw material automatic conveying system, gas-material separator, filled drying tower, air dryer (or nitrogen dryer), and electrical control system (PLC or DCS).
Two kinds of dry air source can be chosen according to different technologic requirements of different materials. Special drying tower structure is used and advanced drying technology with low dew point and low temperature is adopted.
Suitable for drying chip, lump and others of PA6, PA66, PPS, PP, etc.
Application: POY (Filament), FDY, BCF, PSF (Staple Fiber), Non-woven fabrics, BOPET, BOPA, BOPP, Engineering plastics, etc.
WELLSUN WSPD Type Filling Dryer is widely applied to spinning production line such as polyester and nylon composite filament, composite staple and composite non-woven.
Water Ratio：According to the technologic requirements, it can reach to 20ppm
Dry Air Dew Point：≤-80℃
Energy Consumption Per Ton for reference: 30KWh/t~50KWh/t
(In accordance with capacity）